How To Paint Ceramic Tile In Kitchen | Home Cosmetica Guide

How To Paint Ceramic Tile In Kitchen

Ceramic tile is an ideal material that enhances the beauty of kitchen backsplashes, countertops, and flooring. It’s a thin slab of clay or other inorganic materials coated with some kind of glaze. It usually doesn’t harbor germs and allows you to clean it easily whenever you want.

If you install the wrong tiles, they can give your kitchen an outdated look and don’t fit with the décor and modern appliances. Now, you have two options to do, whether you have to rip out the tiles and replace them or paint your old ceramic tiles.

The second one is a less expensive solution that you may prefer. And most surprisingly, our today’s topic is how to paint ceramic tile in kitchen. Although the entire process needs some careful tasks, it’s a simple project that you can tackle without any hassle.

If you paint the ceramic tiles of your kitchen, you’ll not only be able to restore them but also change their colors as your preference. However, are you still confused about how the entire process works? Follow our step-by-step guide below and make your kitchen well-renovated.

So, let’s dive in!

Related review about tiles:
Smart Tiles Review [Read here]
Best Tiles For Kitchen [Read here]
Best Tile For Shower Floor [Read here]
Best Tile For Bathroom Floor [Read here]
Tic Tac Tiles Reviews [Read here]
Peel And Stick Tiles [Read here]

How to Paint Ceramic Tile in Kitchen

Paint ceramic tile in kitchen

When you’re going to paint ceramic tile in your kitchen, you have to follow some essential steps. Make sure that you’re following the steps, using top-quality tools and materials, and taking your time to complete the project.

Choose the Right Places

There are certain kitchen areas that you should avoid painting. Places like countertop and floor beside the sink are high-moisture areas. Instead, you should opt for other places such as countertop located away from the sink or backsplash behind the stove.

Accumulate Necessary Materials and Tools

If you want to have a smooth ceramic-tiled kitchen, a good quality primer can fulfill your desire. You should choose an epoxy or urethane bonding primer that offers the most durability of your paint. Besides this, you’ll need the following tools and materials.

  • Regular & Scrub Sponge
  • Abrasive Tile Cleaner
  • Drop Cloth
  • Painter’s Tape
  • Paint Tray
  • Latex Paint
  • 200-grit Sandpaper
  • Dust Mask
  • Paintbrush or Roller
  • Bonding Primer (Don’t forget)
  • Orbital Sander
  • Water

Prepare the Tiles

Preparing the ceramic tiles is necessary before applying the primer. It includes removing the debris, dirt, and film that cover the tiles. If your tiles are glazed, they’re less likely to stick the paint. So, you need to sand them properly.

Before starting the sanding process, open the windows and apply an abrasive cleaner to the tiles. Remove grime from tiles and grout by using a scrub sponge. After 20 minutes, rinse the tiles with water and damp sponge. Finally, let them dry for several hours.

You’re now ready to sand the entire surface. To do this, use an orbital sander or 200-grit sandpaper for sanding the ceramic tiles. Next, wipe the surface with a damp cloth and wait for 30 minutes so that the surface can thoroughly dry.

Repair any Crack Tile or Missing Grouts

If you find several areas where grouts are missing and cracked tiles need repairing, you should fix them before applying the primer. Regrouting requires a lot of time, but we have an easy solution. Use paintable caulk to fill the missing-grout areas.

Apply the Primer

Using a primer is a must before painting ceramic tiles. The primer helps the paint stick to the tiles and prevents the moisture from building up. Although it comes in a variety of types, you should use a bonding primer that properly sticks to the surface.

To begin the process, cover doors, windows, and towel bars by placing a drop cloth with painter’s tape. Make sure that you keep the windows open to allow proper ventilation. In the end, apply a small amount of bonding primer to the tiles and grouts and let them dry.

If the primer starts bubbling up or doesn’t stick to the surface properly, you’ll have to clean the area and reapply the primer. To get better results, choose a small area to use the primer. You should use a roller or brush to apply it to the rest of the surface.

Related blog: How To Grout Tile Backsplash? [Read here]

Paint the Ceramic Tiles

Paint the ceramic tiles

Once you’ve thoroughly applied the primer and it has fully dried, it’s time to paint the ceramic tiles in your kitchen. You can use either Alkyd Paint or Oil-based Paint, depending on your preference. Follow the steps below to paint the entire backsplash tiles.

  • Take a paint tray and pour the paint into it.
  • Paint the entire surface by using a brush or roller.
  • Let the paint thoroughly dry.
  • Wipe away any residue by using a damp cloth.
  • Paint another new coat and end up the painting process.

Along with a coat of primer, you have to provide two more coats of paint to the entire surface. You can also apply several coats of a polyurethane sealer near the countertops to create a moisture-resistant surface. This will protect the areas from the black soot.

Stencil on Ceramic Tile (Optional)

Stenciling is something that can enhance the beauty of ceramic tiles. If you apply it in your kitchen, the look of your kitchen will be changed. Once you’ve painted the entire backsplash tiles, you can apply stencils that match the shape and size of your tiles.

To do this, you have to apply the desired stencil to the tile and secure it with painter’s tape. Then, paint with the color you choose and use a stencil brush for a fine touch. Once you’ve stenciled on the entire surface, let the paint thoroughly dry.

How to paint ceramic tiles in kitchen? Pinterest Pin

Frequently Asked Questions

#What kind of paint do you use on ceramic tiles?

There are two types of paints that you can use on ceramic tiles: latex paint and epoxy paint.

#Is painting kitchen tiles a good idea?

Painting kitchen tiles is an excellent and quick way to make the old tiles look new. In terms of costs, painting kitchen tiles is a better option than replacing them.

#How do you paint over old kitchen tiles?

Before painting your old kitchen tiles, you need to sand the tiles and apply a primer on them. Once you’ve done these things, you can paint your old kitchen tiles without any hassle.


After all, you’ve already known how to paint ceramic tile in kitchen. You can paint the most areas of your kitchen, but you should avoid painting kitchen countertops. These places are not useful to paint because they’re directly exposed to moisture.

However, we hope you’ve got a clear understanding of how to do a painting ceramic tile project. If you still have any confusion, feel free to ask us by leaving a comment below. You can also share your real-life experience and valuable suggestions to improve this guide.

How To Grout Tile Backsplash? Update 2021 | Home Cosmetica

How To Grout Tile Backsplash

The grouting tile backsplash is one of the most feasible do-it-yourself projects that you can run anywhere at your home, especially in your kitchen or bathroom. It comes at the end of a tiling project, and you have to do it after the tile adhesive is completely stuck.

Learning how to grout tile backsplash like a pro is essential because a poor grout job can effectively ruin a perfect tile job. If it sounds difficult for you, you can hire a professional. But, if you’re willing to do the project by yourself, the job is going to be fine for you.

Grouting a backsplash is simple, and it doesn’t take too much time. You may need 1 to 2 hours or a little more to complete the whole project without counting the overnight drying time, but it depends on the size of the tile backsplash.

However, if you want to know an easy method of doing this DIY project, you’ve come to the right place. The process is quite simple to do on your own. Just follow the guide and have a grouted backsplash at your home in some easy steps.

Related review about tiles:
Smart Tiles Review [Read here]
Best Tiles For Kitchen [Read here]
Best Tile For Shower Floor [Read here]
Best Tile For Bathroom Floor [Read here]
Tic Tac Tiles Reviews [Read here]
Peel And Stick Tiles [Read here]

How to Grout Tile Backsplash

How To Grout Tile Backsplash
How To Grout Tile Backsplash

A colorful, textured, well-grouted backsplash can enhance the beauty of your house. If you’re looking to do so, read the entire article to know how to do it on your own. Hopefully, you’re going to have a whole new look at your house.

Choose the Grout

Choose The Grout
Choose The Grout

Before you’re starting the grouting project, you have to choose your grout. For your good information, grout has a variety of types and colors. To help you select the right one, we’re going to talk about them below.

Grout Type:

Unsanded: If you have narrow seams, such as less than 1/8-inch wide, you should use unsanded grout. Using this grout with wider seams is likely to crack the backsplash. It’s because it doesn’t have that much binding power.

Sanded: The sanded grout comes with much binding power and ensures the durability of the backsplash. You should use this grout for the tiles that have medium-sized joints. The joints might be between 1/8-inch and 3/8-inch wide.

Quarry type: For grouting terracotta, slate or quarry tiles, this grout is an ideal option. It’s a cement-based grout that is suitable for wider grout joints, like between 3/8-inch to ½-inch wide.

Grout Color:

The grout color is something that can enhance the beauty of your tile backsplash. If you want to select the right grout color, you shouldn’t choose the color that matches with your tile color. So, let’s take a look below to make the right choice.

White grout may show more grime than a dark gray grout, but it can still add a whole new look. On the contrary, darker grout will provide eye-appealing contrast with lighter tiles and be more forgiving when it comes to stains.

Grout Color
Grout Color

A soft gray grout can highlight the pattern of the tile, but it doesn’t show stains as much as white grout will. Colorful grout can provide a fun look by creating an eye-popping aesthetic, so consider a simple color that your eyes catch naturally.

Protect Your Countertops:

Once you’ve chosen the right grout type and color, you need to protect your countertops and adjacent surfaces from spilled grout. To do this, cover them with plastic sheeting and secure the protective layer at its corners with painter’s tape.

Gather the Tools and Materials:

After protecting your countertops and adjacent areas, it’s time to gather the necessary pieces of equipment to accomplish the project. We’re going to provide a list of tools and materials below. You can include or exclude according to your needs.

  • Plastic sheeting
  • Painter’s tape
  • Grout
  • Grout float
  • Grout sealer (if required)
  • Two buckets
  • Putty knife
  • Caulk
  • Sponge
  • Cloth/rags
  • Water

Mix the Grout:

Now, it’s time to mix the grout. If you want to prepare a premixed grout, stir the grout in the bucket by using a putty knife or small margin trowel. You have to blend the mix like a smooth, peanut-butter-like consistency.

In terms of mixing powdered grout, pick a plastic bucket, and mix the grout with water in the bucket. You have to use a margin trowel or a putty knife to mix them until the mixture reaches a toothpaste-like consistency.

Once you’ve got the right consistency, let the grout set for 10 minutes so that it can absorb the whole water. If you need to remix the grout, add more water carefully to get the desired toothpaste-like consistency.

Apply the Grout:

When it comes to applying the grout, break down the area into smaller sections and focus on one section at a time. If you grout the entire backsplash, the grout may become hard, and it can be difficult for you to clean the excess grout on the tiles.  

To put the grout, you need to use a grout float to spread the mixture over your tile joints. If you’re looking to have the best results, you should press the grout firmly in between the empty spaces of the backsplash tiles at a 45-degree angle.

Let the Grout Dry:

In this regard, you have to let the grout dry for 15 to 20 minutes. Then, you also have to make a soft sponge lightly dampened with warm water. Wipe the excess grout from tiles and joints with that wet sponge. Once you’ve wiped the excess grout, let it sit for overnight.

Caulk Your Backsplash:

The final step of this process is to caulk your backsplash. To caulk around your countertops, especially where the backsplash meets windows, carefully apply a bead along the edges by using a damp sponge. Your grouting job will come to an end when the caulk dries.

Related blog: How To Remove Tile Underlayment? [Read here]

Frequently Asked Questions

#How long do you wait to wipe off grout?

You don’t have to wait for long; just wait for 15 to 20 minutes before wiping the grout off the tile backsplash.

#Do you have to grout backsplash tile?

Yes, you have to. The grouting tile backsplash is necessary to ensure the longevity of the tiles. It firmly holds the tiles and provides an attractive look to your eyes.

#What is the best grout for a kitchen backsplash?

When it comes to grouting for a kitchen backsplash, you need to use either sanded or unsanded grout according to the size of the joints. Both are cement-based and can add extra durability.


Hopefully, you’ve got that grouting tile backsplash is an easy, weekend DIY project that you can do without the help of others. If you buff the tile after the grout has thoroughly dried, your tiles look like shinier.

However, you’ve already got a clear understanding on how to grout tile backsplash. If you still have any confusion about grouting tile backsplash and our given steps, feel free to ask below in the comment section.

Image Source:

How To Remove Tile Underlayment? Home Cosmetica

How To Remove Tile Underlayment

Tile underlayment is such a material that sits between the tile and subfloor or underneath the tile on a floor. It’s usually used to provide a smooth surface so that tile mortar can be bonded with tiles, and the subfloor remains undamaged.

The underlayment ensures better tile adhesion and the longevity of a ceramic tile floor by reinforcing the framing system of the subfloor. It’s also used because the sub-floor cannot provide a water-stable base and support the ceramic tile properly.

How To Remove Tile Underlayment

However, there are many people who need to know how to remove tile underlayment. They’re willing to remove it because they may have cracked the tile when moving any bulky piece of furniture or want a change of their old tiles.

If you’re looking for doing so, you’ll notice that it takes plenty of hours. Now, you definitely need the best possible way to remove tile underlayment. Don’t worry; we’re going to show the entire process in some easy steps.

Related review: Smart Tiles Review And Installation [Read here]

How to Remove Tile Underlayment

Using long wood wedges and a sledgehammer is quite effective in removing even the most stubborn tile underlayment. But, it’s still a lot of work to do before you start. So, let’s take a look at the sequential steps below.

Prepare the Tile Floor for Removal

For preparing the tile floor for removal, you have to remove trim work or baseboards around the room. You should be aware of removing the trim work so that you can reinstall when the floor is tiled again.

Prepare the tile floor for removal
Image Source:

Besides that, if possible, you have to remove any built-in furniture like cabinets. Then, you need to cover any ventilation system with plastic and the removable tape of the painters to prevent dust from entering into it.

Collect the Necessary Tools

There are plenty of available tools that you can use to do the job, whether they’re power or hand tools. Here we’ve compiled a list of necessary tools that you require when removing tile underlayment.

  • Chisel
  • Pry bar
  • Scraper
  • Hammer
  • Shop-Vac
  • Painters’ tape
  • Shovel and buckets
  • Tarps and plastic wrap
  • Long-handled floor scraper

Wear Safety Equipment to Protect Yourself

Having the right gear to keep yourself safe is just as important as having the proper tools for the job. When a tile is broken, it can be extremely sharp. So, we recommend you wear long-sleeved shirts and pants.  

When it comes to protecting your hands and eyes, you should wear gloves and safety goggles all the time. Again, having a safety mask is a must because the tiles create a lot of dust that can make your breathing complicated.

Remove the Tiles

If you want to remove all the tiles, you must need a hammer. By using the blunt edge of the hammer, make sure that you break the first tile and then use a chisel against the bottom edge of the tile to lift it.  

Remove the tiles
Image Source:

Once you’ve removed the first tile, place the chisel to the adjacent tiles in the same way. Then, hit the chisel with the hammer so that the tiles can easily pop up. This way, you can remove the rest of the tiles.

Inspect the Underlayment

Once you’ve removed all the tiles, it’s time to inspect the underlayment. You’ll usually find one between your finished flooring and the subfloor. If you find it in good shape, you can reuse it for the next tile installation.  

The underlayment made of plywood is not going to be the best for your tiles. A half-inch and quarter-inch cement board can be much better than plywood. After inspecting the underlayment, remove floor tile adhesive properly.

Remove Floor Tile Adhesive

Removing floor tile adhesive needs a citrus-based adhesive remover that you find at most home improvement stores. Once you’ve applied the adhesive remover and wait for the recommended time, use a scraper to loosen the material.

If the tile was installed with thin-set or tile mortar, use a hammer and chisel to weaken the larger pieces and keep working until all floor tile adhesive is removed. Finally, open windows and turn the fan on to keep the area well ventilated. 

Remove the Underlayment

Removing the underlayment is essential if you want to install a new floor. It’s because you need a unique underlayment every time. But, we always recommend replacing the old underlayment if possible.

If you find the underlayment torn up or water-damaged, you should remove it and don’t try to use it again. Use your pry bar to remove any screws and continue prying until the entire job is completed.

Clean the Subfloor

It’s time to take old tiles, adhesive and smaller chunks into your buckets and throw them out. If you run a larger project, you can use a dumpster rental to dispose of the trashes. Finally, use a shop-vac to vacuum debris and dust.

Frequently Asked Questions

#What is the easiest way to remove tile flooring?

At first, break by hitting the center of the first tile with a hammer and then use a chisel to lift the rest part of the tile. Apply the same method to all the tiles. Finally, strike the mortal with the hammer to remove from the underlayment.

#How do you remove tile without damaging backer board?

To do this, remove the grout from around a tile. Then, drive a stiff putty knife underneath the tile in a parallel way with the floor to pop the tile of the cement board. In the end, gently hit the end of the knife with the hammer.

#How hard is it to remove tile flooring?

Removing tile flooring can be an easy job if you have the right tools. It may take plenty of hours if you use the wrong pieces of equipment. Check the guide above to make sure of the simple removal of your tile flooring.


You’ve already learned how to remove tile underlayment properly within a short time. Now, it’s up to what you’re going to do next, either you replace your old tile floor or manage a new one. We believe you cannot go wrong.

A Comprehensive Smart Tiles Review And Installation

Smart Tiles Review

Disclosure: As an Amazon Associate I earn from qualifying purchases.

Installing ceramic tiles in the backsplash areas once required troweling a mortar and then carefully mounting the tiles in that mortar.

This was not an easy task and left to professionals most of the time.

All that changed with the advent of thin-set adhesives and cement-boards and made most tiling jobs easier for skilled DIYers. Later, these things also became the standard for professionals.

Fortunately, when DIYers were trying to find out an even easier method, several manufacturers offered peel-and-stick tiles.  

If you’re one of the DIYers, you can easily create a tiled backsplash with these products. It can also be an affordable way to enhance your home’s interior décor.

You’ll find a variety of colors and styles to choose from, whether you need them for your kitchen or bathroom.  

The best part is:

You can do it yourself without any messy grout and complicated tile cutting.


In this article, I’m going to share with you several things, including what smart tiles are, smart tiles review, how to install and clean these tiles and my real-life experience.

Stay with me until the end to get wonderful ideas to make your home beautiful

What Are Smart Tiles?

What are smart tiles

Smart Tiles are quite thick 3D stickers that stick to the wall of the kitchen and bathroom. They come with patented gel-o technology and look like tiled backsplashes.

These look just like the real tiles, and the appearance of the tiles is so convincing that many people mistake them for the real things.

These tiles are indirectly heat and moisture resistant. They’re easy to place, and you don’t need any additional tools, just make some cuts if there are outlets and switch covers.

If you make a mistake when placing a tile, simply pull up the tile and replace it with another. Remember that you cannot use a sheet again once you have pulled it up.

Smart Tiles Review

Smart tiles review | Pinterest Pin

I’m now going to review the Smart Tiles Stick Backsplash Muretto. These self-adhesive tiles are 100% premium quality backsplashes.

They’re first designed with a concept of peel and stick tiles in the United States and Canada. They have some excellent features that you should consider before making a purchase.

#Patented Gel-O Technology: Smart Tiles are made of an adhesive, gel component called Gel-O that provides a 3-dimensional effect. That’s why the tiles are stuck on the wall without cracking or yellowing with time.

#Multiple Designs: There are 11 available designs of these tiles, including Beige (Tango Titane), Black (Minimo Nero), Brown (Brixia Pardo), Dark Earth Tone (Milenza Genoa), Grey (Muretto Beige), and more.

#Robust and Versatile: These excellent peel-and-stick tiles have resistance to indirect heat and moisture. Since they’re versatile, you can use them in the kitchen, bathroom, or laundry.

#Easy to Install: When it comes to installation, you can easily do the job without any grout, glue, and additional tools. You may need to make some cuts if you have to place them in the corners.


  • Come with a polished-looking design for backsplash
  • Feature a variety of color options to choose
  • Stick perfectly without damaging the wall paint
  • Won’t yellow, discolor and crack over time
  • Allow you to cut and install easily


  • Sometimes, the color may not be as shown

This is the current price of this “Smart Stick Tiles” at Amazon (affiliate link takes you to

How to Install Smart Tiles

Your home may have walls that are not smooth and suitable for installing smart tiles. So, we don’t recommend you install these tiles over damaged, textured, dusty, and uneven surfaces. That’s why you need to choose flat surfaces before the installation.

How to install smart tiles

Installing peel-and-stick tiles is much easier than expected. To do this, you may need some tools and follow a few steps. The process may require a couple of hours or more, so keep patience when doing this job.

You may need:

  • Finished drywall
  • Sponge and dry rag
  • TSP (Tri-Sodium Phosphate)
  • Pencil or Chalk
  • Knife or cutting mat
  • Metal ruler

#Prepare Your Wall: Before installing the tiles, you need to prepare the wall by doing some little cleanup.  

First off, wash the surface with TSP (Tri-Sodium Phosphate), a powerful grease-remover, and provide the surface enough time to dry.

Instead, you can apply soapy water to clean the plastered, drywalls. Fill any holes or cracks on the wall to remove uneven surfaces.

#Trace Your Guidelines: Trace the guidelines by using a piece of chalk to ensure perfect alignment. If you encounter an uneven surface, you have to mark the height by using a pencil or a piece of chalk.

#Measure and Cut: Measure the space with a ruler and use a box cutter to cut the tiles as your requirements. Make sure you cut a hole or other shapes carefully and accurately.

#Peel and Stick: Pick a sheet of tiles and fold the protective paper in about 2 inches without touching the adhesive portion of the tile.

Align the sticky part with your guideline with light pressure because too much pressure won’t allow you to remove it in the future if needed.

Next, recheck the space and tile, whether you place it right or wrong.

Before installing on the top portion, complete the bottom row from left to right.

If you need to make cuts to allow for outlets and switch covers, keep the measurement and then use a cutter.

#How to Clean Smart Tiles: Once you’ve installed the tiles in your kitchen or bathroom, you don’t usually need to clean them.

But, if needed, just wipe off with soapy water by using a damp cloth. You can also apply a mild chemical cleaner, a cream cleanser, or a glass cleaner to the tiles.

My Experience of Using Smart Tiles

In this section, I’m going to share my experience on how I’ve completed the entire process.

Once I decided to install smart tiles on my kitchen backsplash to enhance beauty. Previously, the backsplash was covered with normal, white paint, as the owner painted before.

As I knew these tiles allow the users to remove without damaging the wall, I thought to use clean and sleek “Brown (Ravenna Farro)” tiles on my kitchen walls.


Once a morning, I found a package full of 40 sheets of tiles at my doorstep, as I ordered earlier.

I opened the package to have proper instructions on how to install the tiles, but they weren’t included, and I needed to check the smart tiles installation process on the company’s website.

According to the manufacturer, I started cleaning my backsplash wall. It was covered with small oil droplets, old grease, and some dust.

So, I took a few dry towels and a soft sponge. I followed the instructions, as written on the website. After half an hour, I finished off the cleanup, and my kitchen backsplash was ready to go.


After cleaning the backsplash, I had enough tiles to cover the wall. I took the measurements of the tiles and determined that I required approximately 22 sheets to cover my entire smart tile kitchen backsplash. Then, I used a pencil to draw a few straight, light guidelines on the wall.

I cut one side of the tile by using a box cutter so that the piece would align the top of the tiles to the guideline and the corner.

I made a mistake during sticking a tile to the wall, as it was slightly crooked. When I peeled it off, it removed a small amount of paint from the wall because my kitchen may not have the top quality paint.

Finally, the installation process took me a couple of hours to finish.

After Installation

Once I’ve finished installing the peel-and-stick tiles all-around my backsplash, it seems that I owned a brand new kitchen once again.

The tiles started bouncing some natural light into space and brightened even more. As the sheets dry immediately, you don’t need to wait for them.

Frequently Asked Questions – (FAQ)

#Are smart tiles removable?

Yes, you can remove these tiles when necessary after installing them. It’s quite easy; just peel off the tile, as you want a change.

These tiles may pull up some paint form the wall, depending on how rigorous you were during installation.

#Are smart tiles heat resistant?

Of course! The Smart Tiles are heat resistant. Once you’ve installed them to the surface, you may need to wait for 48 hours to start resistance from the heat of a stove.

#How long do smart tiles last?

It entirely depends on how you stick them on the wall and how you treat them over time. They will usually stick to your wall for as long as you want them.

#Are smart tiles any good?

Smart Tiles are less complicated to install than traditional tiles. You just need to measure that space, peel the back of the tiles, and stick them to the wall.

#How do you use smart tiles?

To do this, use the box cutter and the ruler, and simply cut off the smart tiles white trim. Then, peel a small section, about 2 inches of the protective paper and fold. Align the top of the tiles to the guideline and the corner and press firmly to set the adhesive.

Once you position the tile accurately, remove the rest of the protective paper and apply pressure to the entire surface to stick appropriately.

Wrapping Up

These tiles are one of the excellent ways for those who are not much experienced to décor their home.

They’re easy to install, and you don’t require a professional to stick them to the walls.

They also come with a variety of options and allow you to choose as your preference and requirements.

All the designs will look fantastic if you match them with the right environment and the appropriate decor.

However, if you have already used these tiles, I want to know from you how it went. Share with me your experience and what you think about these tiles.

Post your questions below if you’ve any queries before trying them in your kitchen.

Some Important Articles Our Readers Love:

Peel And Stick Tiles Review | Read More >
Types Of Ceramic Tiles? Read More >
How To Paint Ceramic Tile In Kitchen? Read More >
How To Grout Tile Backsplash? Read More >
How To Remove Tile Underlayment? Read More >

Image Source: